Last updated: February 2024

RPZ FAQs: Testing


What is meant by due date?

In addition to commissioning testing all RPZ valves require compliance testing. This is an onsite safety test to verify the valve is installed correctly and functioning satisfactorily.

Compliance testing shall be carried out at least annually or at more frequent intervals as specified by the water undertaker. The test due date is the date by which the next compliance test for a RPZ valve should be completed. Both test due date and compliance testing intervals are set by the water undertaker and cannot be changed without their consent.

To be considered as valid or ‘in test’ compliance testing of existing RPZ valves should be carried out no later than the test due date. In the case of RPZ valves tested annually compliance testing can be carried out no earlier than 30 days prior to the test due date. Early testing of other RPZ valves may be undertaken with the agreement of the water undertaker



Feedback

To improve this information please give us your feedback >

Due to your Privacy Preferences, you'll need to enable reCaptcha cookies before completing this form.


Disclaimer

Uncontrolled if downloaded. This is informative, non-statutory guidance and intended for general guidance purposes only; it is subject to change.

Compliance with this information should not be relied upon as guaranteeing no enforcement action will be taken by water undertakers. Water Regs UK accepts no liability for loss, indirect or consequential loss arising from or in connection with this guidance document.

We use cookies to give you the best possible experience with Water Regs UK. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.